Member meetings are held at:
Davanni's Roseville, 1905 W Perimeter Dr., Roseville, MN
Planning meetings remain on Zoom the fourth Tuesday of the month.
Please Note: the starting time of both meetings has been changed to 7:00pm!
Davanni's Roseville, 1905 W Perimeter Dr., Roseville, MN
Planning meetings remain on Zoom the fourth Tuesday of the month.
Please Note: the starting time of both meetings has been changed to 7:00pm!
Club officer* elections were held on Tuesday, November 9th at our Member Meeting. All current officers will remain in their respective positions. Thank you for your vote.
Club officers and directors
*President - Larry Wilz - president@northstarcamaroclub.com
*Vice President - Walter Nowocin - vicepresident@northstarcamaroclub.com
*Treasurer - Lonnie Besser
*Sergeant of Arms - Bill Tholen
Membership Director - Ellen Damsgard - NCCmembership1967@gmail.com
Regalia Director - Steve Schoenecker
Cruise Director - Bill Stelzner
Web Master - Angie Wilz - webmaster@northstarcamaroclub.com
Secretary - OPEN POSITION
Media/Facebook - Jesse Gunderson
Club officers and directors
*President - Larry Wilz - president@northstarcamaroclub.com
*Vice President - Walter Nowocin - vicepresident@northstarcamaroclub.com
*Treasurer - Lonnie Besser
*Sergeant of Arms - Bill Tholen
Membership Director - Ellen Damsgard - NCCmembership1967@gmail.com
Regalia Director - Steve Schoenecker
Cruise Director - Bill Stelzner
Web Master - Angie Wilz - webmaster@northstarcamaroclub.com
Secretary - OPEN POSITION
Media/Facebook - Jesse Gunderson
Check out our Store tab above for all of your regalia and holiday shopping. Our CafePress shop is open for business!
Upcoming Events
December 11 – Toys for Tots – We will be participating again in our local Marine Toys for Tots Program. We will meet as a club at 10:00am at the Quarry Target, 1650 New Brighton Blvd. Minneapolis 55413. After shopping, we will meet for lunch at Doolittle's Woodfired Grill, 550 Winnetka Ave. N., Golden Valley, MN 55427. After lunch we will head across the street to KARE 11 to drop off the toys. You can write checks (or cash) for donation and hand it to any Club officer.
________
February 5 – Holiday Banquet – We plan to attend Stevie Ray's Comedy Cabaret in the Chanhassen Dinner Theater for our holiday banquet. This evening will include dinner and the show. Drinks will be the member's responsibility. The Club will cover $25/person of the cost (between $45-$55 each). This is a member plus one event (two people total maximum).
The Chanhassen Dinner Theater has the following COVID requirements:
________
February 5 – Holiday Banquet – We plan to attend Stevie Ray's Comedy Cabaret in the Chanhassen Dinner Theater for our holiday banquet. This evening will include dinner and the show. Drinks will be the member's responsibility. The Club will cover $25/person of the cost (between $45-$55 each). This is a member plus one event (two people total maximum).
The Chanhassen Dinner Theater has the following COVID requirements:
- Proof of Vaccine Required or negative test within 72 hours of February 5th.
- Mask Use Required throughout the building, except when actively eating or drinking. No bandanas or neck gaiters allowed.
- See their website for more information by clicking here.
________
Additional Events of Interest
Additional Events of Interest
Check back for additional shows organized or supported by NCC members.
Current Event Photos
Saturday, October 23rd we headed down to Ankeny, Iowa to view the Dennis Albaugh Car Collection. His private collection of cars is a treasure to view. We saw several Yenko's that we'd never seen in another collection. This is definitely a collection to come back for another look. A big Thank You to Dennis Albaugh for letting our club visit your collection.
On Saturday, October 2nd one of our members organized a cruise to Duluth. This was a new cruise for our club. We had 26 members sign-up to come. We headed out early from Forest Lake meeting up with a few members along the way. After making two scenic stops along Skyline Drive, we explored Enger Tower and toured the Japanese Garden there. After having lunch at Texas Roadhouse, our group headed for a ride on the Northshore Scenic Railroad. The final leg of the cruise took us through Jay Cooke State Park. Despite some occasional drizzle, we had a great time cruising as a club to view more of our beautiful state.
(Please see Past Events tab above for previous event photos.)
Motor News
Modernized 1967 Chevrolet Camaro Rendering Looks Like It'd Be an Instant Classic
By Vlad Mitrache November 2, 2021
There's nothing wrong in returning to one's roots – in fact, it's the one thing most wise people will recommend to anyone who maybe feels a little lost.
Based on the design of the current 2022 Chevrolet Camaro, we wouldn't say that GM's most famous pony car seems lost, but that doesn't mean it couldn't still benefit from looking back to where it all started.
The original Camaro was introduced in 1966, a full two years after Ford had launched the Mustang, so it was by no means the first to the party. However, that shouldn't be interpreted as a handicap. Ask a neutral, and they'll confirm how, throughout the years, the two models passed the pony car crown from one another, with the occasional interference from other manufacturers as well.
Find the rest of the article here: https://www.autoevolution.com/news/modernized-1967-chevrolet-camaro-rendering-looks-like-it-d-be-an-instant-classic-173220.html#
________
By Vlad Mitrache November 2, 2021
There's nothing wrong in returning to one's roots – in fact, it's the one thing most wise people will recommend to anyone who maybe feels a little lost.
Based on the design of the current 2022 Chevrolet Camaro, we wouldn't say that GM's most famous pony car seems lost, but that doesn't mean it couldn't still benefit from looking back to where it all started.
The original Camaro was introduced in 1966, a full two years after Ford had launched the Mustang, so it was by no means the first to the party. However, that shouldn't be interpreted as a handicap. Ask a neutral, and they'll confirm how, throughout the years, the two models passed the pony car crown from one another, with the occasional interference from other manufacturers as well.
Find the rest of the article here: https://www.autoevolution.com/news/modernized-1967-chevrolet-camaro-rendering-looks-like-it-d-be-an-instant-classic-173220.html#
________
Fifth-Gen Camaro Pickup / El Camino Build Complete: Exclusive
By Jonathan Lopez October 23, 2021
Back in April, GM Authority covered a custom fifth-gen Chevy Camaro set to receive a full pickup / ute conversion from Casados Design in Birmingham, Alabama. When we left off, the Camaro was coming together nicely, with a new rear bed section that gave the muscle car some distinct El Camino vibes. Now, GM Authority has an exclusive update on this “El Camaro” build.
In an recent interview with GM Authority Executive Editor Alex Luft, Casados Design boss Adrian Casados outlined some of the details of the El Camaro build, as well as the shop itself.
Casados Design specializes in one-off high-end coachwork and custom metal shaping, exclusively serving customers looking for top-shelf builds. Think a quarter million dollars and above. In addition to body work, the shop also works on engines and drivetrains, with interior work being the only facet left out of the Casados Design wheelhouse.
Find the rest of the article and more photos here: https://gmauthority.com/blog/2021/10/fifth-gen-camaro-pickup-el-camino-build-complete-exclusive/
________
By Jonathan Lopez October 23, 2021
Back in April, GM Authority covered a custom fifth-gen Chevy Camaro set to receive a full pickup / ute conversion from Casados Design in Birmingham, Alabama. When we left off, the Camaro was coming together nicely, with a new rear bed section that gave the muscle car some distinct El Camino vibes. Now, GM Authority has an exclusive update on this “El Camaro” build.
In an recent interview with GM Authority Executive Editor Alex Luft, Casados Design boss Adrian Casados outlined some of the details of the El Camaro build, as well as the shop itself.
Casados Design specializes in one-off high-end coachwork and custom metal shaping, exclusively serving customers looking for top-shelf builds. Think a quarter million dollars and above. In addition to body work, the shop also works on engines and drivetrains, with interior work being the only facet left out of the Casados Design wheelhouse.
Find the rest of the article and more photos here: https://gmauthority.com/blog/2021/10/fifth-gen-camaro-pickup-el-camino-build-complete-exclusive/
________
Chevy Planning A Grand Camaro Finale in 2024
By Jay Traugott in Muscle Cars
September 26, 2021
A new special edition is in the works.
The sixth-generation Chevrolet Camaro is a fine muscle car that more than holds its own against its arch-rivals, the Ford Mustang and Dodge Challenger. However, Camaro sales continue to tank. The writing is on the wall: the Camaro no longer makes a justifiable business case. Discontinuing it makes more sense than a redesigned successor, though Chevy is rumored to be developing an all-electric four-door muscle sedan. In all likelihood, the Camaro will die in 2024 but GM intends for it to go out with a bang.
According to the Lethal Garage YouTube channel, the American automaker intends to debut the "Heritage Edition" 2024 Camaro ZL1.
Find the rest of the article here: https://carbuzz.com/news/chevy-planning-a-grand-camaro-finale-in-2024
________
By Jay Traugott in Muscle Cars
September 26, 2021
A new special edition is in the works.
The sixth-generation Chevrolet Camaro is a fine muscle car that more than holds its own against its arch-rivals, the Ford Mustang and Dodge Challenger. However, Camaro sales continue to tank. The writing is on the wall: the Camaro no longer makes a justifiable business case. Discontinuing it makes more sense than a redesigned successor, though Chevy is rumored to be developing an all-electric four-door muscle sedan. In all likelihood, the Camaro will die in 2024 but GM intends for it to go out with a bang.
According to the Lethal Garage YouTube channel, the American automaker intends to debut the "Heritage Edition" 2024 Camaro ZL1.
Find the rest of the article here: https://carbuzz.com/news/chevy-planning-a-grand-camaro-finale-in-2024
________
You say you want more from our club...
Stay informed of meetings and events
Check out our Google Club Calendar
and
Don't forget to Like Us on Facebook
Stay informed of meetings and events
Check out our Google Club Calendar
and
Don't forget to Like Us on Facebook
Member and Planning Meetings
The Northstar Camaro Club meets the second and fourth Tuesday of every month. This is a change: Meetings begin at 7:00 pm effective October 2021.
Member meetings are held the second Tuesday of the month at:
Davanni's Roseville, 1905 W Perimeter Dr., Roseville, MN
Planning meetings are held the fourth Tuesday of the month on ZOOM. All members will receive an email invitation and agenda from our Vice President
with a link to attend the Zoom meeting.
Members are welcome to attend both meetings. Topics include both old and new business, and there is usually a presentation or lively discussion relating
to our favorite subject--Camaro's! This is the place to exchange ideas and get
to know fellow club members.
Looking for a car event?
Check out the following links:
https://www.facebook.com/groups/164755116936294/ - Hot Rods and Classics Twin Cities and surrounding shows
https://eventswithcars.com/
https://carshownationals.com/
http://mncarclub.com/events/
|
|
|
|
